Sri Lanka's Emerging Automobile Community for

Land Rover Defender

kavin_RoverKing · Jun 19, 2025, 11:23 AM

Ayy machan! 👋 Most of us love getting our hands dirty and doing the work ourselves, so I thought I'd share how I do an oil change for my Defender. It's actually pretty easy once you get the hang of it. 💪

Here's the step-by-step:

Tools ready: You'll need an oil filter wrench, drain pan, socket wrench, funnel, oil, and the right filter. Don't forget the gloves, brother! 🧤
Lift the Defender: Use the jack and get the front lifted up, then secure it on some stands. Safety first, bro!
Drain the oil: Find the oil drain plug, put the drain pan below, and unscrew it. Let that old oil drip out – don't rush it, give it a minute.
Swap the oil filter: Use the filter wrench to remove the old one. Lightly grease the new filter's rubber seal and screw it on, not too tight though, yeah?
Add the new oil: Pour in the new oil slowly with a funnel. Don't forget to check the level after. You don't wanna overfill or underfill.
Check for leaks: Start the engine, let it run for a minute, then switch off and check under the car for any leaks.

And that's all, machan! You're good to go with fresh oil in your Defender. 🚙💨

Feel free to ask if anything's unclear or if you've got other tips! Happy DIY'ing, boys! 🔧